I've tried several drivers and still my webcam is not working, here's the result of lsusb:

icemountain:~ # lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 0c45:613b Microdia
Bus 002 Device 002: ID 046d:c016 Logitech, Inc. M-UV69a Optical Wheel Mouse
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter
Bus 001 Device 001: ID 0000:0000
icemountain:~ #lsmod | grep vid
videodev 8960 1 sn9c102

And here's what I got for tail -f /var/log/messages when I plug my webcam and dmesg are pretty much the same

usb 2-2: new full speed USB device using uhci_hcd and address 6
May 19 01:16:57 icemountain kernel: usb 2-2: new device found, idVendor=0c45, idProduct=613b
May 19 01:16:57 icemountain kernel: usb 2-2: new device strings: Mfr=0, Product=1, SerialNumber=0
May 19 01:16:57 icemountain kernel: usb 2-2: Product: USB camera
May 19 01:16:57 icemountain kernel: usb 2-2: configuration #1 chosen from 1 choice


I hope you can help me. I you need anything else, I'll be happy to give that to you.


Regards,
Joe Wilde