hello,

I'm rewriting the sn9c10x driver in order to support bulk transfers (the USB chipset on my embedded card does not support iso transfers)

I manage to send control commands to the sn9c101 and receive data. But I've got a problem with the picture size.

I first activate the test mode on the sn9c101(TEST_IMG
reg 0x17). the others settings are the same that in your driver but I disabled the compression and i change the resolution H_SIZE(0x14) and V_SIZE (0x0F).


the problem is that the picture I receive only represent the upper left corner of the full test picture.

I don't understand what's the problem on my configuration, I think the sn9c101 should send me a 320*240 picture that represent all the test picture.

thanks in Advance for your help